3D Printing, NFC and QR Gadgets for Corporate Events
Functional printing, meaning parts that have to hold up and do real work, is a discipline where mistakes show up fast and without mercy. Over the past few weeks, this arc has covered engineering use cases, material choice for load-bearing parts, and failure diagnostics, which wraps everything up as ARC RECAP #2. This installment...
The previous three weeks of this arc covered the four workhorses of technical FDM printing one by one, each with its own temperatures, chamber requirements and typical failure modes. Now it’s time to put them together. This installment is a recap: it introduces no new material, but arranges ABS, ASA, Nylon (PA) and polycarbonate...
PLA is a great starter material, but as soon as parts need to survive heat in a car, mechanical loads, or repeated use in the workshop, its limits show up fast. That’s where ABS steps in, one of the oldest and still most widely used technical filaments. This guide explains when it makes sense...
The first three weeks at printara3d.cz are behind us, and you’ve sent in dozens of questions. Readers responded mainly to the article on PETG composites (CF and GF variants), to the guide on the AMS system in Bambu Lab printers, and to the practical walkthrough on dealing with warping on ABS parts. This arc...
